Resetting Optional Messages; Configuring E-Mail Notification - Brocade Communications Systems Brocade 8/12c User Manual

Resetting optional messages

To reset all Management application optional messages to their default behaviors, complete the
following steps.
1. Select Server > User Profile.
2. Click Optional Messages Reset.
3. Click Yes on the confirmation message.
4. Click OK on the User Profile dialog box.

Configuring e-mail notification

To configure and enable e-mail notification, complete the following steps.
1. Select Server > User Profile.
2. Select the E-mail Notification - Enable check box to enable e-mail notification.
3. Click Filter to set up basic event filter.
4. Enter your e-mail address in the E-mail Address field.
5. Click OK on the User Profile dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
The User Profile dialog box displays.
The Password Policy dialog box displays.
A successful reset message displays.
The User Profile dialog box displays.
For step-by-step instructions about setting up basic event filters, refer to
event filtering" on page 845.
Enter more than one e-mail address, separating each with a semi-colon.
5
User profiles
"Setting up basic
147