4. Review the report details.
5. Click the close button (X) on the Policy_Name - Policy Monitor Report browser window.
6. Click Close on the Policy Monitor dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
•
Fabric Checks—Displays the Fabric Name and Status of the policy check for the following
options:
Fabric - Check zoning is Enabled
Fabric - Check that all zones belong to at least one zone config
Fabric - Check the number of initiator ports zoned to each storage port is less than
Configured_Value
•
SAN Switch Checks—Displays the switch name and switch IP address and Status of the
policy check for the following options:
SAN Switch - Check if the product is configured to send events to this server
SAN Switch - Check if the product is configured to send Upload Failure Data Capture to
an FTP server
SAN Switch - Check for at least Configured_Minimum_Value connections to
neighboring switches
•
Host Check—Displays the Host name and Status of the policy check for the following
option:
Host - Check for at least Configured_Minimum_Value connections to attached fabrics
•
Management Check—Displays the Status of the policy check for the following option:
Management - Check to see if the server backup is enabled and working
To export a report, refer to
"Exporting SAN reports"
on page 925.
Running a policy monitor
29
837