Filtering Real-Time Performance Data - Brocade Communications Systems Brocade 8/12c User Manual

27
SAN real-time performance data
6. Click the right arrow to move the selected ports to the Selected table.
7.

Filtering real-time performance data

To filter real-time performance data from the Real Time Performance Graphs dialog box, complete
the following steps.
1. Open the Real Time Performance Graphs dialog box.
2. Click Select to change the object type.
3. Select the object type (FC Ports, ISL Ports, Device Ports, EE Monitors, GE Ports, FCIP Tunnels,
4. Right-click anywhere in the Available table and select Expand All.
5. Select the ports or trunks you want to include in the performance graph in the Available table.
6. Click the right arrow to move the selected ports to the Selected table.
7.
8. Select the measure by which you want to gather performance data from the Measures list.
9. (Optional) Enter a value (percentage) in the Reference Line field to set a reference for the
10. Select the granularity at which you want to gather performance data from the Granularity list.
11. Select the Interpolate check box to use interpolation to fill existing gaps, if necessary.
12. (Optional) Click Other Options and select the Use Same Y-axis check box to make the Y-axis
13. Move the Row Height slider to the left to make the row height smaller or to the right to make it
784
Click OK.
The Real Time Performance Graphs dialog box displays.
For step-by-step instructions, refer to
page 783. The Real Time Performance Graphs dialog box displays.
Managed HBA Ports, Managed CNA Ports, E Port Trunks, or 10GE Ports) by which you want to
graph performance from the Show list.
NOTE
Devices with 10GE ports must be running Fabric OS 6.4.1ltd or later to obtain the correct
TE port statistics (TX/RX).
Press Ctrl or Shift and then click to select more than one port.
Click OK.
The Real Time Performance Graphs dialog box displays.
To select more than one measure, click the Additional Measures expand arrows and select the
check box for each additional measure.
transmit and receive utilization.
Note that this field is only available when you select Tx % Utilization or Rx % Utilization from the
Measures list.
range the same for object.
The Use Same Y-axis check box is only available when you select Rx MB/sec and Tx MB/sec
from the Measures list. You do not have to apply this change, the performance graph
automatically updates.
bigger.
"Generating a real-time performance graph"
Brocade Network Advisor SAN User Manual
on
53-1002167-01