4
Flyovers
7.
FIGURE 40
98
Select the Connection tab
information you want to display on flyover.
Options dialog box (Flyovers option, Connection tab)
a. Select the protocol from the Protocol list.
The default protocol is Fibre Channel. Depending on which protocol you select, some
properties may not be available for all protocols.
b. Select each property you want to display in the connection flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available for all protocols:
Fibre Channel (default)
•
Active FC4 Types
•
Address
•
Attached Port#
•
Blocked Configuration
•
Class of Service
•
Device Type
•
Fabric
•
FC Address
•
IP Address
•
Master Port #
•
Max Frame Size (bytes)
•
Name
•
Name (port)
(Figure
40) and complete the following steps to select the
•
•
•
•
•
•
•
•
•
•
•
•
•
Node WWN
Operational State
OS Device Name
Port #
Port Blocked Reason
Port State
Port Type
Port WWN
Speed Configured (Gbps)
Speed Supported (Gbps)
Symbolic Name
Supported FC4 Types
Zone Alias
Brocade Network Advisor SAN User Manual
53-1002167-01