Resetting Your Display - Brocade Communications Systems Brocade 8/12c User Manual

4
SAN Display

Resetting your display

You can reset your system to display the default display settings. Note that returning to current
settings after a reset may require configuring each global fabric or group setting individually. The
following table
state.
TABLE 13
Settings
Show port
Show connected end device
Map Layout
Line Types
Port Display
Map Flyovers
Product List
Table Column Order
To reset the Management application to the default display and view settings, complete the
following steps.
1. Select Server > Options.
2. Select SAN Display in the Category list.
3. Click Reset Display.
4. Click Yes on the reset confirmation message.
5. Click Apply or OK to save your work.
92
(Table 13) details the settings that change with reset and the associated default
Default Display Settings
Default State
Disabled.
Set to Hide All.
Set to default for Groups.
Set to default for Groups.
Set to Attached Ports only.
Set to include the following properties:
•
•
Set to only display basic property list.
Set to default for open system.
The Options dialog box displays.
The display and view settings are immediately reset to the default display settings (as detailed
in the Default display Settings table
Product Display—Name, Device Type, WWN, IP Address, and Domain ID.
Connection Display—Name (port), Address, Node WWN, Port WWN, and Port #.
(Table 13)).
Brocade Network Advisor SAN User Manual
53-1002167-01