Brocade Communications Systems Brocade 8/12c User Manual page 981

Menu Command
Port Auto Disable. Select to configure port auto disable
flag on individual FC_ports or all ports on a selected
device, as well as unblock currently blocked ports.
Security. Select to manage security.
Fabric Assigned WWN. Select to configure fabric assigned
world wide names to a switch port or AG port.
VLANs. Select to launch the VLAN Manager.
Allow/Prohibit Matrix. (Enterprise Licensed version Only)
Select to allow FICON users to configure an Allow/Prohibit
Matrix table. You can select any matrix tables and
compare them either vertically or horizontally.
FICON. (Enterprise Licensed version Only) Select to
configure FICON.
Port Groups. (Trial and Licensed version Only) Select to
configure a group of ports from one or more switches
within the same fabric.
FC Troubleshooting. Select to troubleshoot your SAN.
FCIP Troubleshooting. Select to troubleshoot FCIP.
Brocade Network Advisor SAN User Manual
53-1002167-01
SAN main menus
Command Options
L2 ACL. Select to configure Layer 2 Access Control Lists
on products and ports.
Configure Fabric. Select to configure cascaded FICON
from the selected fabric.
Merge Fabrics. Select to merge the selected fabrics.
Trace Route. Select to view the route information between
two device ports.
Device Connectivity. Select to view the connectivity
information for two devices.
Fabric Device Sharing. (Trial and Licensed version Only)
Select to determine if the selected fabrics are configured
to share devices.
Diagnostic Port Test. Select to run a dialgnostic port test.
Ping. Select to perform a zoning check between the
selected device port WWNs.
Trace Route. (Trial and Licensed version Only) Select to
view the route information from a source port on the local
device to a destination port on another device.
Performance. (Trial and Licensed version Only) Select to
view IP performance between two devices.
A
937