18
Tape LUN statistics
FIGURE 245
5. To clear the tape LUN statistics for all member LUNs for the container, click Clear.
6. When prompted with a confirmation dialog box, click Yes.
7.
Viewing and clearing tape LUN statistics for specific tape LUNs
To view or clear statistics for tape LUNs in a container, complete these steps:
1. Select Configure > Encryption from the menu task bar.
2. Select a group, switch, or engine from the Encryption Center Devices table that contains the
3. Select a tape target storage device, then click LUNs.
536
Tape LUN Statistics dialog box
To update the tape LUN statistics, click Refresh.
The Encryption Center dialog box displays
storage device to be configured, then select Group/Switch/Engine > Targets from the menu
task bar, or right-click a group, switch, or engine and select Targets.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays
The Target Tape LUNs dialog box displays
LUNs.
(Figure
153).
(Figure
242).
(Figure
246). The dialog box lists configured tape
Brocade Network Advisor SAN User Manual
53-1002167-01