Entity Mib Conformance Information - Brocade Communications Systems Brocade 8/12c Reference

Entity MIB conformance information

This section lists the entityConformance MIBs.
entityConformance group.
object and OID
entityCompliance
1.3.6.1.2.1.47.3.1.1
entity2Compliance
1.3.6.1.2.1.47.3.1.2
Fabric OS MIB Reference
53-1002151-01
Figure 41
Access Description
Not The compliance statement for SNMP entities that implement version 1
accessible of the Entity MIB.
Mandatory groups:
•
entityPhysicalGroup
•
entityLogicalGroup
•
entityMappingGroup
•
entityGeneralGroup
•
entityNotificationsGroup
NOTE: This object is deprecated.
Not The compliance statement for SNMP entities that implement version 2
accessible of the Entity MIB.
Mandatory groups:
•
1: entityPhysicalGroup
•
2: entityPhysical2Group
•
3: entityGeneralGroup
•
4: entityNotificationsGroup
Components:
•
Type: Group
Group: entityLogical2Group
Description: Implementation of this group is not mandatory for
agents which model all MIB object instances within a single
naming scope.
•
Type: Group
Group: entityMappingGroup
Description: Implementation of the entPhysicalContainsTable is
mandatory for all agents. Implementation of the
entLPMappingTable and entAliasMappingTables are not
mandatory for agents which model all MIB object instances within
a single naming scope. Note that the entAliasMappingTable may
be useful for all agents, however implementation of the
entityLogicalGroup or entityLogical2Group is required to support
this table.
•
Type: Object
Object: entPhysicalSerialNum
Min access: not-accessible
Description: Read and write access is not required for agents
which cannot identify serial number information for physical
entities, or cannot provide non-volatile storage for NMS-assigned
serial numbers. Write access is not required for agents which can
identify serial number information for physical entities, but cannot
provide non-volatile storage for NMS-assigned serial.

Entity MIB conformance information

on page 103 shows the structure of the
5
115