Fcfestatus Group - Brocade Communications Systems Brocade 8/12c Reference

fcFeStatus group

This group consists of tables that contain operational status and established service parameters
for the fabric element and the attached Nx_Ports.
Object and OID
fcFxPortStatusTable
1.3.6.1.2.1.75.1.2.1
fcFxPortStatusEntry
1.3.6.1.2.1.75.1.2.1.1
fcFxPortID
1.3.6.1.2.1.75.1.2.1.1.1
fcFxPortBbCreditAvailable
1.3.6.1.2.1.75.1.2.1.1.2
fcFxPortOperMode
1.3.6.1.2.1.75.1.2.1.1.3
fcFxPortAdminMode
1.3.6.1.2.1.75.1.2.1.1.4
fcFxPortPhysTable
1.3.6.1.2.1.75.1.2.2
fcFxPortPhysEntry
1.3.6.1.2.1.75.1.2.2.1
fcFxPortPhysAdminStatus
1.3.6.1.2.1.75.1.2.2.1.1
Fabric OS MIB Reference
53-1002151-01
Access Description
Not accessible A table that contains operational status and parameters of the
Fx_Ports, one entry for each Fx_Port in the fabric element.
Not accessible An entry containing operational status and parameters of an
Fx_Port.
Read only The address identifier by which this Fx_Port is identified within the
fabric. The Fx_Port might assign its address identifier to its attached
Nx_Ports during fabric login.
Read only The number of buffers currently available for receiving frames from
the attached port in the buffer-to-buffer flow control. The value
should be less than or equal to fcFxPortBbCredit.
NOTE: This object is not supported on the FC10-6 port blade.
Read only The current operational mode of the Fx_Port.
Valid values:
•
unknown (1)
•
fPort (2)
•
flPort (3)
Read only The desired operational mode of the Fx_Port.
Not accessible A table that contains the physical level status and parameters of the
Fx_Ports, one entry for each Fx_Port in the fabric element.
Not accessible An entry containing physical level status and parameters of an
Fx_Port.
Read only The desired state of the Fx_Port. A management station might place
the Fx_Port in a desired state by setting this object accordingly.
Valid values:
•
online (1)
•
offline (2)
•
testing (3)
The testing state (3) indicates that no operational frames can be
passed. When a fabric element initializes, all Fx_Ports start with
fcFxPortPhysAdminStatus in the offline state (2). As the result of
either explicit management action or per configuration information
accessible by the fabric element, fcFxPortPhysAdminStatus is then
changed to either the online (1) or testing (3) states or remains in
the offline state (2).
4

fcFeStatus group

79