Before Loading Mibs; Mib Loading Order - Brocade Communications Systems Brocade 8/12c Reference

Before loading MIBs

Before loading Brocade MIB files, ensure that you have the correct version of SNMP for your Fabric
OS version
TABLE 2
Firmware
Fabric OS v5.x
Fabric OS v6.0.0
Fabric OS v6.1.0
Fabric OS v6.2.0
Fabric OS v6.1.2_CEE
Fabric OS v6.3.0
Fabric OS v6.4.0
Fabric OS v6.4.1_fcoe
Fabric OS v7.0.0
1.
2.

MIB loading order

Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the
IMPORTS section near the top of the MIB. When loading the Brocade MIBs, refer to
ensure any MIB dependencies are loading in the correct order.
Fabric OS MIB Reference
53-1002151-01
(Table 2).
Fabric OS-supported SNMP versions
SNMPv2 is supported in Fabric OS v5.0.4 and later, but SNMPv2 traps are not supported.
Fabric OS v5.x supports the SNMPv3-USM MIB (snmpUsmMIB), which is available as RFC 3414.
SNMPv1 SNMPv2
1
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes No
Yes No
Loading Brocade MIBs
SNMPv3
2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Figure 5
1
to
9