Trunking Group - Brocade Communications Systems Brocade 8/12c Reference

6

Trunking group

Object and OID
swBlmPerfEEDid
1.3.6.1.4.1.1588.2.1.1.1.23.2.
1.7
swBlmPerfFltMntTable
1.3.6.1.4.1.1588.2.1.1.1.23.3
swBlmPerfFltMntEntry
1.3.6.1.4.1.1588.2.1.1.1.23.3.
1
swBlmPerfFltPort
1.3.6.1.4.1.1588.2.1.1.1.23.3.
1.1
swBlmPerfFltRefkey
1.3.6.1.4.1.1588.2.1.1.1.23.3.
1.2
swBlmPerfFltCnt
1.3.6.1.4.1.1588.2.1.1.1.23.3.
1.3
swBlmPerfFltAlias
1.3.6.1.4.1.1588.2.1.1.1.23.3.
1.4

Trunking group

Object and OID
swTrunk
1.3.6.1.4.1.1588.2.1.1.1.24
swSwitchTrunkable
1.3.6.1.4.1.1588.2.1.1.1.24.1
swTrunkTable
1.3.6.1.4.1.1588.2.1.1.1.24.2
swTrunkEntry
1.3.6.1.4.1.1588.2.1.1.1.24.2.
1
168
Access Description
Read only Gets SID information by reference number. SID (Source Identifier) is
a 3-byte field in the frame header used to indicate the address
identifier of the N_Port from which the frame was sent.
Not Filter-based monitoring counter.
accessible
To configure the predefined monitors on port, use the fmmonitor
--addmonitor <frame_type> -port <slot/port_list> command.
To configure the user-defined monitors on port, use one of the
following commands:
•
fmmonitor --create <frame_type> -pat <bitpattern> [-port
<slot/port_list>]
•
fmmonitor --addmonitor <frame_type> -port <slot/port_list>
Not Filter-based monitoring counter for given port.
accessible
Read only This object identifies the port number of the switch.
Read only This object identifies the reference number of the filter. This
reference number is assigned when a filter is created. In the SNMP
Index, start with one instead of 0, add one to actual reference key.
Read only Get statistics of filter-based monitor. Filter-based monitoring
provides information about a filter hit count, such as:
•
Read command
•
SCSI or IP traffic
•
SCSI Read/Write
Read only Alias name for the filter.
Access Description
Not The OID sub-tree for swTrunk group.
accessible
Not This object indicates whether the switch supports the trunking
accessible feature or not:
•
no (0)
•
yes (8)
Not This object displays trunking information for the switch.
accessible
For the Brocade 4100, cc ports per trunk are supported.
Not Entry for the trunking table.
accessible
Fabric OS MIB Reference
53-1002151-01