Brocade Communications Systems Brocade 8/12c Reference page 227

Object and OID
connUnitRevsEntry
1.3.6.1.3.94.1.7.1
connUnitRevsUnitId
1.3.6.1.3.94.1.7.1.1
connUnitRevsIndex
1.3.6.1.3.94.1.7.1.2
connUnitRevsRevId
1.3.6.1.3.94.1.7.1.3
connUnitRevsDescription
1.3.6.1.3.94.1.7.1.4
connUnitSensorTable
1.3.6.1.3.94.1.8
connUnitSensorEntry
1.3.6.1.3.94.1.8.1
connUnitSensorUnitId
1.3.6.1.3.94.1.8.1.1
connUnitSensorIndex
1.3.6.1.3.94.1.8.1.2
connUnitSensorName
1.3.6.1.3.94.1.8.1.3
connUnitSensorStatus
1.3.6.1.3.94.1.8.1.4
connUnitSensorInfo
1.3.6.1.3.94.1.8.1.5
Fabric OS MIB Reference
53-1002151-01
Access Description
Not Each entry contains the information for a specific revision.
accessible
Read only The connUnitId value for the connectivity unit that contains this revision
table.
Read only A unique value among all connUnitRevsEntrys with the same value of
connUnitRevsUnitId, in the range between 1 and connUnitNumRevs.
Index 1 returns the hardware version. Index 2 returns the software
version.
Read only A vendor-specific string identifying a revision of a component of the
connUnit indexed by connUnitRevsUnitId.
Index 1 returns the switchType from switchShow. Index 2 returns the
Fabric OS version from telnet command version: for example, v2.6.
Read only Description of a component to which the revision corresponds.
Index 1 returns the hardware version. Index 2 returns the software
version.
Not Table of the sensors supported by each connectivity unit managed by
accessible this agent.
For specific sensor counts on the various switches., refer to
page 144.
Not Each entry contains the information for a specific sensor.
accessible
Read only The connUnitId value of the connectivity unit that contains this sensor
table.
Set to connUnitId.
Read only A unique value among all connUnitSensorEntrys with the same value of
connUnitSensorUnitId, in the range between 1 and the return value from
connUnitNumSensor.
Read only A textual identification of the sensor, intended primarily for operator use.
Each contains the name of sensor in textual format: for example, Temp
#1, Fan #2, and so on.
Read only The status indicated by the sensor.
Possible values are:
•
unknown (1)
•
other (2)
•
ok (3) The sensor indicates okay.
•
Warning (4) - The sensor indicates a warning.
•
failed (5) - The sensor indicates failure.
•
Nominal = 3 (ok).
Read only Miscellaneous static information about the sensor, such as its serial
number.
Each contains textual information about the sensor.
Returns the serial ID if this is for the power supply; otherwise, returns
Null.
Connectivity unit group
Table 16
9
on
207