Brocade Communications Systems Brocade 8/12c Reference page 153

TABLE 15
Trap name
"swFault"
(not supported)
"swSensorScn"
"swFCPortScn"
"swEventTrap"
"swFabricWatchTrap"
page 135
"swTrackChangesTrap"
page 136
"swIPv6ChangeTrap"
page 136
"swPmgrEventTrap"
"swFabricReconfigTrap"
page 136
"swFabricSegmentTrap"
page 137
"swExtTrap"
"swStateChangeTrap"
page 137
"swPortMoveTrap"
"swBrcdGenericTrap"
page 137
The swSsn variable is optional in trap messages.
The swGroupName, swGroupType, and swGroupMemPos variables are optional trap messages in
v2.6.x. The swGroupName, swGroupType, and swGroupMemPos variables are not supported in
Fabric OS v4.x and later versions.
Because Fabric OS releases prior to v5.2.0 used to show the Enterprise Field in the swTraps from
the sysObjectID (set using config variable "snmp.sysObjectID"), the Enterprise field will not always
be resolved to "sw." If the sysObjectID is changed by user the Enterprise field in the trap will show
some unresolved value.
To resolve this issue, beginning with the v5.2.0 release, the SNMP configuration variable
snmp.trapEnterpriseFlag lets you define the way that the Enterprise field displays.
Select either the previous behavior in which the Enterprise field is taken from sysObjectID or the
new behavior in which the value in the Enterprise field will always be "sw":
Fabric OS MIB Reference
53-1002151-01
SW-MIB traps
on page 134
on page 134
on page 134
on page 135
on
on
on
on page 136
on
on
on page 137
on
on page 137
on
•
Set the value of this variable to 0, to use the sysObjectID.
•
Set the value to 1 to use the fixed enterprise value, "sw" (1.3.6.1.4.1.1588.2.1.1.1.).
Commands to configure
N.A.
N.A.
Always on
For more information, refer to the snmpConfig command in the Fabric OS
Command Reference.
Fabric OS Command: portthconfig, thconfig, sysmonitor --config
Fabric OS Command: trackChangesSet and trackChangesShow
For more information, refer to the snmpConfig command in the Fabric OS
Command Reference.
6
sw traps
133