Brocade Communications Systems Brocade 8/12c Reference page 313

object and OID
lldpXdot3RemPortAutoN
egEnabled
1.0.8802.1.1.2.1.5.462
3.1.3.1.1.2
lldpXdot3RemPortAutoN
egAdvertisedCap
1.0.8802.1.1.2.1.5.462
3.1.3.1.1.3
lldpXdot3RemPortOperM
auType
1.0.8802.1.1.2.1.5.462
3.1.3.1.1.4
lldpXdot3RemPowerTabl
e
1.0.8802.1.1.2.1.5.462
3.1.3.2
lldpXdot3RemLinkAggTa
ble
1.0.8802.1.1.2.1.5.462
3.1.3.3
lldpXdot3RemLinkAggEn
try
1.0.8802.1.1.2.1.5.462
3.1.3.3.1
lldpXdot3RemLinkAggSt
atus
1.0.8802.1.1.2.1.5.462
3.1.3.3.1.1
lldpXdot3RemLinkAggPo
rtId
1.0.8802.1.1.2.1.5.462
3.1.3.3.1.2
lldpXdot3RemMaxFrame
SizeTable
1.0.8802.1.1.2.1.5.462
3.1.3.4
lldpXdot3RemMaxFrame
SizeEntry
1.0.8802.1.1.2.1.5.462
3.1.3.4.1
lldpXdot3RemMaxFrame
Size
1.0.8802.1.1.2.1.5.462
3.1.3.4.1.1
Fabric OS MIB Reference
53-1002151-01
Access Description
Read only The truth value used to indicate whether port auto-negotiation is enabled
on the given port associated with the remote system.
Read only This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which
is associated with the given port on the remote system.
Read only An integer value that indicates the operational MAU type of the sending
device.
Not This table contains power Ethernet information of the remote system.
accessible
NOTE: This table is not supported.
Not This table contains port link aggregation information (as a part of the
accessible LLDP 802.3 organizational extension) of the remote system.
Not The link aggregation information about remote system's port component.
accessible
Read only The bitmap value contains the link aggregation capabilities and the
current aggregation status of the link.
Read only This object contains the IEEE 802.3 aggregated port identifier, aAggPortID
(IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex
for the port component associated with the remote system.
If the remote port is not in link aggregation state and if it does not support
link aggregation, this value should be zero.
Not This table contains one row per port of maximum frame size information
accessible (as a part of the LLDP 802.3 organizational extension) of the remote
system.
Not The maximum frame size information about a particular port component.
accessible
Read only An integer value indicating the maximum supported frame size in octets
on the port component associated with the remote system.
LLDP-EXT-DOT3-MIB
16
293