Entity Mib Objects; Physical Entity Group - Brocade Communications Systems Brocade 8/12c Reference

5

Entity MIB objects

•
•
Syntax OCTET STRING (SIZE(0..32)) Empty string or SnmpEngineID

Entity MIB objects

The Entity MIB objects are divided into the following groups:
The following sections list the MIBs in each group.

Physical entity group

Object and OID
entityPhysical
1.3.6.1.2.1.47.1.1
entPhysicalTable
1.3.6.1.2.1.47.1.1.1
entPhysicalEntry
1.3.6.1.2.1.47.1.1.1.1
entPhysicalIndex
1.3.6.1.2.1.47.1.1.1.1.1
entPhysicalDescr
1.3.6.1.2.1.47.1.1.1.1.2
106
For other switches, the snmpEngineID takes the WWN. For example, if the WWN value is
10:00:00:05:1e:35:d5:ee, the snmpEngineID displays
80.00.06.34.B2.10.00.00.05.1E.35.D5.EE (hex)
If the WWN cannot be taken, the snmpEngineID takes the IP address + port number along with
the private enterprise number and algorithm type used. An example of this type of
snmpEngineID would be
00.00.06.34.00.00.00.A1.0A.20.93.CA (hex)
•

Physical entity group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

•
Logical entity group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
•
Entity mapping group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
•
General group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Access
Not
accessible
Not
accessible
Not
accessible
Not
accessible
Read only
Description
Physical entity group.
Table 13 contains one row per physical entity
always contains at least one row for an "overall" physical entity.
This object is implemented for Fabric OS v6.4.0. The "overall" physical
entry for Brocade is the chassis, and in Fabric OS v6.4.0 and later, it is
marked as a FRU.
Information about a particular physical entity.
Each entry provides objects (entPhysicalDescr, entPhysicalVendorType,
and entPhysicalClass) to help an NMS identify and characterize the
entry, and objects (entPhysicalContainedIn and
entPhysicalParentRelPos) to help an NMS relate the particular entry to
other entries in this table.
The index for this entry.
A textual description of the physical entity (physical name of the entity,
such as chassis, blade, port, and so on). This object should contain a
string that identifies the entity manufacturer's name and should be set
to a distinct value for each version or model of the physical entity.
The name provides the entity type and number (for example, slot 1,
power supply, and so on). The description gives the textual description
of the type of the entry (for example, power supply, module, and so on).
(Figure 42). The table
Fabric OS MIB Reference
53-1002151-01