Brocade Communications Systems Brocade 8/12c Reference page 193

Object and OID
swConnUnitFTB2Miss
1.3.6.1.4.1.1588.2.1.1.1.
27.1.11
swConnUnitFTB6Miss
1.3.6.1.4.1.1588.2.1.1.1.
27.1.12
swConnUnitZoneMiss
1.3.6.1.4.1.1588.2.1.1.1.
27.1.13
swConnUnitLunZoneMiss
1.3.6.1.4.1.1588.2.1.1.1.
27.1.14
swConnUnitBadEOF
1.3.6.1.4.1.1588.2.1.1.1.
27.1.15
swConnUnitLCRX
1.3.6.1.4.1.1588.2.1.1.1.
27.1.16
swConnUnitRDYPriority
1.3.6.1.4.1.1588.2.1.1.1.
27.1.17
swConnUnitLli
1.3.6.1.4.1.1588.2.1.1.1.
27.1.18
swConnUnitInterrupts
1.3.6.1.4.1.1588.2.1.1.1.
27.1.19
swConnUnitUnknownInterr
upts
1.3.6.1.4.1.1588.2.1.1.1.
27.1.20
swConnUnitTimedOut
1.3.6.1.4.1.1588.2.1.1.1.
27.1.21
swConnUnitProcRequired
1.3.6.1.4.1.1588.2.1.1.1.
27.1.22
swConnUnitTxBufferUnava
ilable
1.3.6.1.4.1.1588.2.1.1.1.
27.1.23
swConnUnitStateChange
1.3.6.1.4.1.1588.2.1.1.1.
27.1.24
swConnUnitC3DiscardDue
ToRXTimeout
1.3.6.1.4.1.1588.2.1.1.1.
27.1.25
Fabric OS MIB Reference
53-1002151-01
Switch connectivity unit port statistics extension table
Access Description
Read only This counter is incremented when the port receives a frame with an
SID/DID combination that cannot be routed by the VF module.
Applicable to 8G platforms only.
Read only This counter is incremented when port receives a frame with an SID
that cannot be routed by FCR. Applicable to 8G platforms only.
Read only This counter is incremented when the port receives a frame with an
SID and DID that are not zoned together.
Read only This counter is incremented when the port receives a frame with an
SID, DID, and LUN that are not zoned together.
This is not currently used.
Read only The number of frames with bad EOF.
Read only The number of link control frames received.
Read only The number of times that sending R_RDY or VC_RDY primitive signals
was a higher priority than sending frames, due to diminishing credit
reserves in the transmitter at the other end of the fibre.
Read only The number of low level interrupts generated by the physical and link
layer.
Read only The object represents all the interrupts received on a port. The
interrupt includes LLI, unknown, and so on.
Read only The object represents the unknown interrupts received on a port.
Read only The object represents the number of frames that have been timed out
due to any reason.
Read only The object represents the number of frames trapped by CPU.
Read only The object shows the count for the number of times the port failed to
transmit frames.
Read only The object shows the count for the number of times the port has gone
to offline, online, and faulty state.
Read only The number of Class 3 receive frames discarded due to timeout.
6
173