Brocade Communications Systems Brocade 8/12c Reference page 56

2
Interfaces group
Object and OID
ifPhysAddress
1.3.6.1.2.1.2.2.1.6
ifAdminStatus
1.3.6.1.2.1.2.2.1.7
ifOperStatus
1.3.6.1.2.1.2.2.1.8
ifLastChange
1.3.6.1.2.1.2.2.1.9
ifInOctets
1.3.6.1.2.1.2.2.1.10
ifInUcastPkts
1.3.6.1.2.1.2.2.1.11
ifInNUcastPkts
1.3.6.1.2.1.2.2.1.12
ifInDiscards
1.3.6.1.2.1.2.2.1.13
36
Access Description
Read only The interface's address at the protocol layer immediately below the network
layer in the protocol stack.
For interfaces that do not have such an address (for example, a serial line),
this object should contain an octet string of zero length.
•
eth0 returns the MAC address for GbE ports
•
lo returns null
•
SNMP represents the FC port ID in ASCII hex represenation. For
example, 36:35:35:33:36 is equivalent to the decimal value of 65536.
To get the decimal value 36-30 = 6; 35-30= 5 and so on. To get the FC
port ID, convert the decimal into hex (the hex value of 65536 is 01 00
00, where the first two digits are the domain, the next two digits are the
area, and the last two digits are the port number).
ASCII hex (36:35:35:33:36) => decimal (65536) => hex (01 00 00)
Read-write The desired state of the interface.
Valid values:
•
up (1)
•
down (2)
•
testing (3)
NOTE: The testing (3) state indicates that no operational packets can be
passed. This object is read-only in Fabric OS v4.x and later versions.
This object should return same value with ifOperStatus for WAN and FC ports
interfaces.
Read only The current operational state of the interface.
Valid values:
•
up (1)
•
down (2) or
•
testing (3)
•
unknown (4)
Active tunnels will be up; inactive tunnels will be down (configured but not
online).
NOTE: The testing (3) state indicates that no operational packets can be
passed.
Read only The value of sysUpTime at the time the interface entered its current
operational state. If the current state was entered prior to the last
re-initialization of the local network management subsystem, then this object
contains a zero value.
Read only The total number of octets received on the interface, including framing
characters. This value is the number of 4-byte words received and multiplied
by four.
Read only The number of subnetwork-unicast packets delivered to a higher-layer
protocol.
NOTE: This object is not supported.
Read only The number of nonunicast packets (for example, subnetwork-broadcast or
subnetwork-multicast) delivered to a higher-layer protocol.
NOTE: This object is not supported.
Read only The number of inbound packets that were chosen to be discarded (even
though no errors had been detected) to prevent their being deliverable to a
higher-layer protocol.
One possible reason for discarding such a packet could be to free buffer
space.
Fabric OS MIB Reference
53-1002151-01