Brocade Communications Systems Brocade 8/12c Reference page 97

Object and OID
fcFeModuleFxPortCapacity
1.3.6.1.2.1.75.1.1.4.1.6
fcFeModuleName
1.3.6.1.2.1.75.1.1.4.1.7
fcFxPortTable
1.3.6.1.2.1.75.1.1.5
fcFxPortEntry
1.3.6.1.2.1.75.1.1.5.1
fcFxPortIndex
1.3.6.1.2.1.75.1.1.5.1.1
fcFxPortName
1.3.6.1.2.1.75.1.1.5.1.2
fcFxPortFcphVersionHigh
1.3.6.1.2.1.75.1.1.5.1.3
fcFxPortFcphVersionLow
1.3.6.1.2.1.75.1.1.5.1.4
fcFxPortBbCredit
1.3.6.1.2.1.75.1.1.5.1.5
fcFxPortRxBufSize
1.3.6.1.2.1.75.1.1.5.1.6
Fabric OS MIB Reference
53-1002151-01
Access Description
Read only The number of Fx_Ports that can be contained within the module.
Within each module, the ports are uniquely numbered in the range
from 1 to fcFeModuleFxPortCapacity, inclusive. However, the
numbers are not required to be contiguous.
Valid values:
•
Brocade 300
•
Brocade 4100
•
Brocade 4900
•
Brocade 5000
•
Brocade 5100
•
Brocade 5300
•
Brocade 7500 or 7500E
•
Brocade 7600
•
Brocade 7800 Extension Switch
•
Brocade 8000
•
Brocade Encryption Switch
•
Brocade DCX
•
Brocade DCX-4S
•
Brocade 48000
•
Brocade 6510
•
Brocade DCX 8510-4 Backbone
•
Brocade DCX 8510-8 Backbone
Read-write The Name_Identifier of the module.
This object returns the WWN of the switch.
Not accessible A table that contains configuration and service parameters of the
Fx_Ports, one entry for each Fx_Port in the fabric element.
Not accessible An entry containing the configuration and service parameters of an
Fx_Port.
Not accessible Identifies the Fx_Port within the module. This number ranges from 1
to the value of fcFeModulePortCapacity for the associated module.
The value remains constant for the identified Fx_Port until the
module is re-initialized.
Read only The World Wide Name of this Fx_Port. Each Fx_Port has a unique
port World Wide Name within the fabric.
This object returns the WWN of the port.
Read only The highest or most recent version of FC-PH that the Fx_Port is
configured to support. This value is always 32.
Read only The lowest or earliest version of FC-PH that the Fx_Port is configured
to support. This value is always six.
Read only The total number of receive buffers available for holding Class 1
connect-request, and Class 2 or 3 frames from the attached
Nx_Port. It is for buffer-to-buffer flow control in the direction from the
attached Nx_Port (if applicable) to Fx_Port.
Read only The largest Data_Field Size (in octets) for an FT_1 frame that can be
received by the Fx_Port.
4
fcFeConfig group
24 ports
32 ports
64 ports
32 ports
40 ports
80 ports
32 ports
16 ports
24 ports
32 ports
32 ports
640 ports
320 ports
384 ports
48 ports
320 ports
640 ports
77