Brocade Communications Systems Brocade 8/12c Reference page 155

Trap name and OID
swEventTrap
1.3.6.1.4.1.1588.2.1.1.1
.0.4
swFabricWatchTrap
1.3.6.1.4.1.1588.2.1.1.1
.0.5
Fabric OS MIB Reference
53-1002151-01
Variables
swEventIndex
swEventTimeInfo
swEventLevel
swEventRepeatCount
swEventDescr
swSsn
swVfId
swFwClassAreaIndex
swFwThresholdIndex
swFwName
swFwLabel
swFwLastEventVal
swFwLastEventTime
swFwLastEvent
swFwLastState
swFwLastSeverityLevel
swSsn
swVfId
Description
This trap is generated when an event occurs with a
level that is at or below swEventTrapLevel.
#TYPE A firmware event has been logged.
#SUMMARY Event %d: %s (severity level %d) - %s
SSN is #%s
#ARGUMENTS 0, 1, 2, 4, 5
#SEVERITY Informational
#TIMEINDEX 1
#STATE Operational
Each trap recipient has a configured severity level
association. Whenever an error message is
generated at or above that configured severity level
the recipient is notified of the event.
This trap is generated for all RASLog messages. From
Fabric OS v4.4.0, this trap is only generated for
external RASLog messages except for AN-1006,
AUTH-3001 to AUTH-3008, FW-3001, SEC-3001 to
SEC-3034, and SEC-3044 to SEC-3048 RASlog
messages.
To get more details on any particular event, refer to
the Fabric OS Message Reference.
Trap to be sent by Fabric Watch to notify of an event.
#TYPE Fabric Watch has generated an event.
#SUMMARY Threshold %s in Class/Area %d at
index %d has generated event %d
with %d on %s. This event is %d.This
event label is %d, event severity
level is %d and SSN is #%s
#ARGUMENTS 2, 0, 1, 6, 4, 5, 7, 3, 8, 9
#SEVERITY Warning
#TIMEINDEX 1
#STATE Operational
For information on setting thresholds in Fabric
Watch, refer to the Fabric Watch Administrator's
Guide.
6
sw traps
135