Brocade Communications Systems Brocade 8/12c Reference page 231

Object and OID
connUnitPortStatus
1.3.6.1.3.94.1.10.1.7
connUnitPortTransmitter
Type
1.3.6.1.3.94.1.10.1.8
connUnitPortModuleType
1.3.6.1.3.94.1.10.1.9
Fabric OS MIB Reference
53-1002151-01
Access Description
Read only An overall protocol status for the port. For a U_Port, the status should be
ols (9).
Possible values are:
•
unknown (1)
•
unused (2) - Device cannot report this status.
•
ready (3) - FCAL Loop or FCPH Link reset protocol initialization has
completed.
•
warning (4) - Do not use.
•
failure (5) - Port is faulty.
•
notparticipating (6) - Loop not participating and does not have a
loop address. Do not use.
•
initializing (7) - Protocol is proceeding. Do not use.
•
bypass (8) - Do not use.
•
ols (9) - FCP offline status. (Not supported in Fabric OS v2.6.1.)
NOTE: In Fabric OS v2.6.x, for an E_Port, F_Port, or FL_Port, the value is
3 (ok). For a U_Port, the value is 2 (unused) if not faulty with
GBIC, 1(unknown) if not faulty but no GBIC, or 5 (failure) if faulty.
In Fabric OS v3.x and later, for an E_Port, F_Port, FL_Port or
other Port and online port state, the value is 3 (ok). For G_Port or
other Port and offline port state, the value is 9 (ols). For
unknown portype and offline port state, the value is 1
(unknown).
Read only The technology of the port transceiver.
Possible values are:
•
unknown (1)
•
other (2)
•
unused (3)
•
shortwave (4)
•
longwave (5)
•
copper (6)
•
scsi (7)
•
longwaveNoOFC (8)
•
shortwaveNoOFC (9)
•
longwaveLED (10)
•
ssa (11) (Not supported in Fabric OS v2.6.1.)
For an external FC port, this value should be 9 (shortwaveNoOFC), 8
(longwaveNoOFC), or 6 (copper).
Read only The module type of the port connector.
Possible values are:
•
unknown (1)
•
other (2)
•
gbic (3)
•
embedded (4) Fixed (oneXnine)
•
glm (5)
•
gbicSerialId (6)
•
gbicNoSerialId (7)
•
gbicNotInstalled (8)
•
smallFormFactor (9)
For an external FC port with GBIC, this value is set to 6 (gbicSerialId) or 7
(gbicNoSerialId). For an external FC port without GBIC, this value is set to
8 (gbicNotInstalled).
Connectivity unit group
9
211