Brocade Communications Systems Brocade 8/12c Reference page 234

9
Connectivity unit group
Object and OID
connUnitPortControl
1.3.6.1.3.94.1.10.1.16
(continued)
connUnitPortName
1.3.6.1.3.94.1.10.1.17
connUnitPortPhysicalNu
mber
1.3.6.1.3.94.1.10.1.18
connUnitPortStatObject
1.3.6.1.3.94.1.10.1.19
214
Access Description
•
Read-write Return values are:
- resetConnUnitPort portDisable (F or E_Port, loop for U_Port)
- bypassConnUnitPort portDisable (FL_Port)
- unbypassConnUnitPort portEnable (FL_Port)
- offlineConnUnitPort portDisable (E, F, FL_Port)
- onlineConnUnitPort portEnable (U)
- resetConnUnitPortCounters clear the port statistics counter. -
- when rebooted, this defaults to 1 (unknown).
Read-write A string describing the addressed port.
NOTE: This object is read only for Brocade switches.
Read only This is the internal port number by which this port is known. In many
implementations, this should be the same as connUnitPortIndex. Some
implementations might have an internal port representation not
compatible with the rules for table indices. In these cases, provide the
internal representation of this port in this object. This value might also
be used in the connUnitLinkPortNumberX or connUnitLinkPortNumberY
objects of the connUnitLinkTable.
The internal port numbers for Brocade switch. The Brocade switches
support 0 through maximum number of ports.
The maximum number of supported ports are as follows.
Brocade 300
Brocade 4100
Brocade 4900
Brocade 5000
Brocade 5100
Brocade 5300
Brocade 7500 or 7500E
Brocade 7600
Brocade 7800 Extension Switch
Brocade 8000
Brocade Encryption Switch
Brocade DCX
Brocade DCX-4S
Brocade 48000
Brocade 6510
Brocade DCX 8510-4 Backbone
Brocade DCX 8510-8 Backbone
Read only This OID is deprecated.
This contains the OID of the first object of the table that contains the
statistics for this particular port. If this has a value of 0, then there are
no statistics available for this port. The port type information helps
identify the statistics objects found in the table. From this point, use the
getnext command to get the next statistics object. When the first part of
the OID changes, the end of table is reached.
Mapped to connUnitPortStatFabricUnitId.
24 ports
32 ports
64 ports
32 ports
40 ports
80 ports
32 ports
16 ports
24 ports
32 ports
32 ports
640 ports
320 ports
384 ports
48 ports
320 ports
640 ports
Fabric OS MIB Reference
53-1002151-01