CTRL_L: Assigns a command to Ctrl+L.
CTRL_O: Assigns a command to Ctrl+O.
CTRL_T: Assigns a command to Ctrl+T.
CTRL_U: Assigns a command to Ctrl+U.
command: Command to be assigned to the hotkey.
Description
Use hotkey to assign a command to a configurable hotkey.
Use undo hotkey to restore the default.
By default:
Ctrl_G: display current-configuration (display the running configuration).
•
Ctrl_L: display ip routing-table (display the IPv4 routing table information).
•
Ctrl_O: undo debugging all (disable all debugging functions).
•
•
Ctrl_T: No command is assigned to this hotkey.
Ctrl_U: No command is assigned to this hotkey.
•
Examples
# Assign the display tcp status command to the hotkey Ctrl+T.
<Sysname> system-view
[Sysname] hotkey ctrl_t display tcp status
quit
Syntax
quit
View
Any view
Default level
0: Visit level (executed in user view)
2: System level (executed in other views)
Description
Use quit to return to the upper-level view.
In user view, this command disconnects you from the device.
Examples
# Return from GigabitEthernet 1/0/1 interface view to system view and then to user view.
[Sysname-GigabitEthernet1/0/1] quit
[Sysname] quit
<Sysname>
7