Ftp Client Dscp; Ftp Client Ipv6 Dscp - HP 6125G Command Reference Manual
6125 blade switch series fundamentals command reference
Hide thumbs
Also See for 6125G:
- Command reference manual (426 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
User(192.168.0.211:(none)):abc
331 Password required for abc
Password:
230 User logged in.
[ftp]
ftp client dscp
Syntax
ftp client dscp dscp-value
undo ftp client dscp
View
System view
Default level
2: System level
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63.
Description
Use ftp client dscp to set the DSCP value for IPv4 to use for outgoing FTP packets on an FTP client.
Use undo ftp client dscp to restore the default.
By default, IPv4 uses the DSCP value 0 for outgoing FTP packets on an FTP client.
Examples
# Set the DSCP value for IPv4 to use for outgoing FTP packets to 30 on an FTP client.
<Sysname> system-view
[Sysname] ftp client dscp 30
ftp client ipv6 dscp
Syntax
ftp client ipv6 dscp dscp-value
undo ftp client ipv6 dscp
View
System view
Default level
2: System level
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63.
Description
Use ftp client ipv6 dscp to set the DSCP value for IPv6 to use for outgoing FTP packets on an FTP client.
66
Advertisement
Table of Contents
