Display Alarm - HP 6125G Command Reference Manual

<Sysname> system-view
[Sysname] copyright-info enable
When a Telnet user logs in, the following statement appears:
•
******************************************************************************
* Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
<Sysname>
When a console user quits user view, the following statement appears:
•
******************************************************************************
* Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
User interface aux0 is available.
Please press ENTER.
# Disable displaying the copyright statement.
<Sysname> system-view
[Sysname] undo copyright-info enable
When a Telnet user logs in, the user view prompt appears:
•
<Sysname>
When a console user quits user view, the following message appears:
•
User interface aux0 is available.
Please press ENTER.

display alarm

Syntax
display alarm [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
slot slot-number: Displays alarms presents on an IRF member switch. The slot-number argument
represents the IRF member ID of the switch. If no member switch is specified, this command displays
alarm information for all IRF member switches.
132
*
*
*
*
*
*