Free Web-Users - HP 6125G Command Reference Manual

num1: Absolute number of a user interface, in the range of 0 to 19.
aux: Specifies the AUX user interface.
vty: Specifies the VTY user interface.
num2: Relative number of a user interface, in the range of 0 to 7 for an AUX user interface and in the
range of 0 to 7 for a VTY user interface.
Description
Use free user-interface to release connections established on the specified user interface.
This command cannot release the connection that you are using.
Examples
# Release the connection established on user interface VTY 1:
Display the users that are operating the device.
1.
<Sysname> display users
The user application information of the user interface(s):
Idx UI
12
+ 14
Following are more details.
VTY 0
VTY 2
+
F
If the operations of the user using VTY 1 affect the operations of the administrator, log out the user.
2.
<Sysname> free user-interface vty 1
Are you sure to free user-interface vty1? [Y/N]:y

free web-users

Syntax
free web-users { all | user-id user-id | user-name user-name }
View
User view
Default level
2: System level
Parameters
all: Specifies all web users.
user-id: Web user ID, which is a hexadecimal number of eight digits.
user-name: Name of the web user. This argument can contain 1 to 80 characters.
Description
Delay Type Userlevel
VTY 0 00:04:02 TEL
VTY 2 00:00:00 TEL
:
Location: 192.168.0.10
:
Location: 192.168.0.202
: Current operation user.
: Current operation user work in async mode.
3
3
28