Display Ip Http - HP 6125G Command Reference Manual

By default, 8 data bits are set for each character.
This command is only applicable to the asynchronous serial port (console port).
The data bits setting must be the same for the user interfaces of the connecting ports on the device and
the terminal device for communication.
Examples
# Specify 7 data bits for each character.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] databits 7

display ip http

Syntax
display ip http [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip http to display HTTP information.
Examples
# Display information about HTTP..
<Sysname> display ip http
HTTP port: 80
Basic ACL: 0
Current connection: 0
Operation status: Running
Table 1 Command output
Field
HTTP port
Basic ACL
Current connection
Description
Port number used by the HTTP service.
Basic ACL number associated with the HTTP service.
Number of current connections.
19