User-Interface - HP 6125G Command Reference Manual

copy
debugging
delete
dir
display
fixdisk
format
free
ftp
ipc
lock
mkdir
more
move
mtracert
oam
---- More ----

user-interface

Syntax
user-interface { first-num1 [ last-num1 ] | { aux | vty } first-num2 [ last-num2 ] }
View
System view
Default level
2: System level
Parameters
first-num1: Absolute number of the first user interface, in the range of 0 to 19.
last-num1: Absolute number of the last user interface, in the range of 1 to 19, but cannot be smaller than
the first-num1.
aux: Specifies the AUX user interface.
vty: Specifies the VTY user interface.
first-num2: Relative number of the first user interface, in the range of 0 to 3 for an AUX user interface and
in the range of 0 to 7 for a VTY user interface.
last-num2: Relative number of the last user interface, in the range of 1 to 3 for an AUX user interface and
in the range of 1 to 7 for a VTY user interface, but cannot be smaller than first-num 2.
Description
Use user-interface to enter a single or multiple user interface views.
In a single user interface view, the configuration takes effect in the user view only.
In multiple user interface views, the configuration takes effect in these user views.
Examples
# Enter the user interface view of AUX 0.
<Sysname> system-view
Copy from one file to another
Enable system debugging functions
Delete a file
List files on a file system
Display current system information
Recover lost chains in storage device
Format the device
Clear user terminal interface
Open FTP connection
Interprocess communication
Lock current user terminal interface
Create a new directory
Display the contents of a file
Move the file
Trace route to multicast source
OAM protocol
50