Display Nandflash Page-Data - HP 6125G Command Reference Manual

Table 13 Command output
Field
No
Physical block
3200 block(s) total, 3 block(s) bad.

display nandflash page-data

Syntax
display nandflash page-data page-value [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
page-value: Serial number of a physical page.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display nandflash page-data to display the data on the specified physical page in the NAND Flash
memory.
This command is always used in combination with the display nandflash file-location command to check
the correctness of the data in the NAND Flash memory.
Examples
# Display the content of the file test.cfg which is saved in the NAND Flash memory.
<Sysname> display nandflash file-location test.cfg
Logical Chunk
---------------------------
chunk(0)
chunk(1)
chunk(2)
filename: test.cfg
<Sysname> display nandflash page-data 1236
0000: 0D 0A 23 0D 0A 20 76 65 72 73 69 6F 6E 20 35 2E
0010: 32 30 2C 20 41 6C 70 68 61 20 31 30 31 31 0D 0A
0020: 23 0D 0A 20 73 79 73 6E 61 6D 65 20 48 33 43 0D
0030: 0A 23 0D 0A 20 70 61 73 73 77 6F 72 64 2D 63 6F
Description
Serial number of the bad blocks
Serial number of the physical pages with bad blocks
Total number of blocks and bad blocks in the NAND Flash memory
Physical Page
1234
1236
1235
92
..#.. version 5.
20, Alpha 1011..
#.. sysname HP.
.#.. password-co