HP 6125G Command Reference Manual page 47

num2: Relative number of a user interface, in the range of 0 to 7 for an AUX user interface and in the
range of 0 to 7 for a VTY user interface.
Description
Use send to send messages to the specified user interfaces.
To end message input, press Ctrl+Z. To cancel message input and return to user view, press Ctrl+C.
Examples
# Send message hello abc to the AUX user interface 0.
<Sysname> send aux 0
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
hello abc^Z
Send message? [Y/N]:y
<Sysname>
***
***
***Message from aux0 to aux0
***
hello abc
<Sysname>
# Assume you are using VTY 0. Before you restart the device, to inform users that are accessing the
device through other user interfaces, perform the following steps:
Display information about all users
1.
<Sysname> display users
The user application information of the user interface(s):
Idx UI
+ 12
13
Following are more details.
VTY 0
VTY 1
+
F
// The output shows that a user is using VTY 0.
Send a notification to the user of VTY 1.
2.
<Sysname> send vty 1
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
Note please, I will reboot the system in 3 minutes!^Z
Send message? [Y/N]:y
// A message is sent to VTY 1, telling that the system will reboot in 3 minutes.
Delay Type Userlevel
VTY 0 00:00:00 TEL
VTY 1 00:00:06 TEL
:
Location: 192.168.1.26
:
Location: 192.168.1.20
: Current operation user.
: Current operation user work in async mode.
3
3
40