Ping; Quit - HP V1905 Series Getting Started Manual

Ethernet0/7
Ethernet0/10

ping

Syntax
ping [ -s packetsize ] [-c count ] ip-address
View
User view
Parameter
ip-address: Sets the source IP address to send the ICMP ECHO-REQUEST packets.
-s packetize: Specifies the size (in bytes) of each ICMP ECHO-REQUEST packet (excluding the IP and ICMP
headers), which ranges from 20 to 1,472 and defaults to 56 bytes.
-c count: Specifies how many times the ICMP ECHO-REQUEST packet will be sent. The count argument is the
times, which ranges from 1 to 4,294,967,295 and defaults to 5.
Description
Use the ping command to check the IP network connectivity and the reachability of a host.
Example
# Check the reachability of the host with IP address 192.168.0.100.
<Command-Line> ping 192.168.0.100
PING 192.168.0.100: 56
Reply from 192.168.0.100 : bytes=56 sequence=1 ttl=255 time = 1ms
Reply from 192.168.0.100 : bytes=56 sequence=2 ttl=255 time = 2ms
Reply from 192.168.0.100 : bytes=56 sequence=3 ttl=255 time = 1ms
Reply from 192.168.0.100 : bytes=56 sequence=4 ttl=255 time = 3ms
Reply from 192.168.0.100 : bytes=56 sequence=5 ttl=255 time = 2ms
--- 192.168.0.100 ping statistics ---
5 packet transmitted
5 packet received
0% packet loss
round-trip min/avg/max = 1/2/3 ms

quit

Syntax
quit
View
User view
Parameter
None
Ethernet0/8 Ethernet0/9
data bytes, press CTRL_C to break
120