HP 6125G Command Reference Manual page 118

Parameters
by-linenum: Identifies each line of displayed information with a line number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display saved-configuration to display the contents of the configuration file to be used at the next
startup.
Use this command to verify that important settings have been saved to the next-startup configuration file.
For a device supporting main and backup configuration files, this command displays the main
next-startup configuration file.
If no next-startup configuration file has been specified, or the specified next-startup configuration does
not exist, this command displays the error message "The config file does not exist!"
Related commands: display current-configuration, reset saved-configuration, and save.
Examples
# Display the saved startup configuration file.
<Sysname> display saved-configuration
#
version 5.20.99, Release 0000
#
sysname 6125G Blade Switch
#
irf mac-address persistent timer
irf auto-update enable
undo irf link-delay
#
domain default enable system
#
telnet server enable
#
vlan 1
#
radius scheme system
server-type extended
primary authentication 127.0.0.1 1645
primary accounting 127.0.0.1 1646
user-name-format without-domain
#
domain system
access-limit disable
---- More ----
111