Ip Https Enable - HP 6125G Command Reference Manual

Description
Use ip https certificate access-control-policy to associate the HTTPS service with a certificate attribute
access control policy.
Use undo ip https certificate access-control-policy to remove the association.
By default, the HTTPS service is not associated with any certificate attribute access control policy.
Association of the HTTPS service with a certificate attribute access control policy can control the access
rights of clients.
Related commands: display ip https; pki certificate access-control-policy (Security Command
Reference).
Examples
# Associate the HTTPS server to certificate attribute access control policy myacl.
<Sysname> system-view
[Sysname] ip https certificate access-control-policy myacl

ip https enable

Syntax
ip https enable
undo ip https enable
View
System view
Default level
3: Manage level
Parameters
None
Description
Use ip https enable to enable the HTTPS service.
Use undo ip https enable to disable the HTTPS service.
By default, the HTTPS service is disabled.
The device can act as the HTTP server that can be accessed only after the HTTP service is enabled.
Enabling the HTTPS service triggers an SSL handshake negotiation process.
If the local certificate of the device exists, the SSL negotiation succeeds, and the HTTPS service can be
started.
If no local certificate exists, the SSL negotiation triggers a certificate application process that often fails
because it times out. If that happens, execute the ip https enable command multiple times to start the
HTTPS service.
Related commands: display ip https.
Examples
# Enable the HTTPS service.
<Sysname> system-view
34