HP 6125G Command Reference Manual page 155

Parameters
interface [ interface-type interface-number ]: Displays the alarms present on the transceiver module in the
specified interface. The interface-type interface-number argument specifies an interface by its type and
number. If no interface is specified, the command displays present alarm information for all transceiver
modules.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display transceiver alarm to display alarms present on transceiver modules.
If no error occurs, None is displayed.
Support for the transceiver modules depends on the device model.
Table 26 Common transceiver module alarms
Field
SFP/SFP+
RX loss of signal
RX power high
RX power low
TX fault
TX bias high
TX bias low
TX power high
TX power low
Temp high
Temp low
Voltage high
Voltage low
Transceiver info I/O error
Transceiver info checksum error
Transceiver type and port configuration
mismatch
Transceiver type not supported by port
hardware
Examples
# Display the alarms present on the transceiver module in interface GigabitEthernet 1/0/3.
Table 26 describes the
Remarks
Incoming (RX) signal is lost.
Incoming (RX) power level is high.
Incoming (RX) power level is low.
Transmit (TX) fault
TX bias current is high.
TX bias current is low.
TX power is high.
TX power is low.
Temperature is high.
Temperature is low.
Voltage is high.
Voltage is low.
Transceiver information read and write error.
Transceiver information checksum error.
Transceiver type does not match port configuration.
Transceiver type is not supported on the port.
148
transceiver module alarms that might occur.