command authorization
Syntax
command authorization
undo command authorization
View
User interface view
Default level
3: Manage level
Parameters
None
Description
Use command authorization to enable command authorization.
Use undo command authorization to restore the default.
By default, command authorization is disabled. Logged-in users can execute commands without
authorization.
With command authorization enabled, users can perform only commands authorized by the server.
Examples
# Enable command accounting for VTY 0 so users logging in from VTY 0 can perform only the
commands authorized by the HWTACACS server.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] command authorization
databits
Syntax
databits { 7 | 8 }
undo databits
View
User interface view
Default level
2: System level
Parameters
7: Sets 7 data bits for each character.
8: Sets 8 data bits for each character.
Description
Use databits to set data bits for each character.
Use undo databits to restore the default.
18