Patch Install - HP 6125G Command Reference Manual

----------------------------------------------------------------------
2 MPU
Table 18 Command output
Field
The location of patches
Slot
Version
Temporary
Common
Current
Running
Active
Start-Address

patch install

Syntax
patch install file filename
undo patch install
View
System view
Default level
3: Manage level
Parameters
file filename: Specifies a patch package file name.
Description
Use the patch install command to install all the patches in the specified patch package file.
Use the undo patch install to remove the patches.
When you execute the patch install file command, the message "Do you want to continue running
patches after reboot? [Y/N]:" is displayed.
• Entering y or Y: The installed patches remain running after system reboot. If a slot is empty, the
system will record the information.
Entering n or N: The installed patches do not run after system reboot.
•
0 0 0
Description
Patch file location. You can use the patch location command to change the
location.
Member ID. If only one CPU is on the device, slot-number is displayed. If
multiple CPUs are on the device, slot-number is displayed for the master CPU
and slot-number.cpu-id is displayed for a subordinate CPU.
Patch version.
Number of temporary patches. These patches are interim solutions that are
provided to fix critical bugs. They are not formally released.
Number of common patches. These patches are formally released to users.
A common patch always includes the functions of its previous temporary
patches.
Total number of patches.
Number of patches in RUNNING state.
Number of patches in ACTIVE state.
Start address of the memory patch area in the memory.
0 0 0
126
0x43457b0