Command-Privilege - HP 6125G Command Reference Manual

alias: Alias for the keyword, which must be different from the first keyword of any non-undo command.
Description
Use command-alias mapping to configure a command keyword alias.
Use undo command-alias mapping to delete a command keyword alias.
By default, a command keyword has no alias.
Command keyword aliases take effect only after you enable the command keyword alias function.
Examples
# Define show as the alias of the display keyword.
<Sysname> system-view
[Sysname] command-alias mapping display show
After you configure the alias, you can enter show to execute a display command. For example, you can
enter show clock to execute the display clock command.
# Delete the alias of the display keyword.
<Sysname> system-view
[Sysname] undo command-alias mapping display

command-privilege

Syntax
command-privilege level level view view command
undo command-privilege view view command
View
System view
Default level
3: Manage level
Parameters
level level: Command level, which ranges from 0 to 3.
view view: Specifies a view.
command: Command to be set in the specified view.
Description
Use command-privilege to assign a level for a specific command in a view.
Use undo command-privilege to restore the default.
By default, each command in a view has a specified level.
Command levels include four privileges: visit (0), monitor (1), system (2), and manage (3). You can
assign a privilege level according to the user's need. When logging in to the device, the user can access
the assigned level and all levels below it.
Level changes can cause maintenance, operation, and security problems. HP recommends using the
default command level or modifying the command level under the guidance of professional staff.
The command specified for the command-privilege command must be complete, and have valid
parameters. For example, the default level of the tftp server-address { get | put | sget } source-filename
2