Return; Screen-Length Disable - HP 6125G Command Reference Manual

return

Syntax
return
View
Any view except user view
Default level
2: System level
Description
Use return to return to user view from any other view. Pressing Ctrl+Z has the same effect.
Related commands: quit.
Examples
# Return to user view from GigabitEthernet 1/0/1 interface view.
[Sysname-GigabitEthernet1/0/1] return
<Sysname>

screen-length disable

Syntax
screen-length disable
undo screen-length disable
View
User view
Default level
1: Monitor level
Description
Use screen-length disable to disable pausing between screens of output for the current session.
Use undo screen-length disable to enable pausing between screens of output for the current session.
By default, a login user uses the settings of the screen-length command. The default settings of the
screen-length command are: pausing between screens of output and displaying up to 24 lines on a
screen.
When the screen pause function is disabled, all output is displayed at one time and the screen is
refreshes continuously.
This command only takes effect for the current session. When you log out, the setting by this command
is restored to the default.
Related commands: screen-length.
Examples
# Disable pausing between screens of output for the current session.
<Sysname> screen-length disable
8