Display Clipboard - HP 6125G Command Reference Manual

[ destination-filename ] [ source { interface interface-type interface-number | ip source-ip-address } ]
command is 3. To enable users with the privilege level 0 to execute the tftp server-address put
source-filename command (such as tftp 192.168.1.26 put syslog.txt) and disable them from specifying the
get, sget, source, or destination-filename option, configure the command-privilege level 0 view shell tftp
1.1.1.1 put a.cfg command.
The command specified for the undo command-privilege view command can be incomplete. For
example, configuring the undo command-privilege view system ftp command restores all commands
starting with ftp (such as ftp server acl, ftp server enable, and ftp timeout) to their default level. If you
have modified the level of commands ftp server enable and ftp timeout, and you want to restore only the
ftp server enable command to its default level, use the undo command-privilege view system ftp server
command.
If you change the command level of a command in a specified view from the default command level to
a lower level, you must change the command levels of the quit command and the command used to enter
this view. For example, the default command level of commands interface and system-view is 2 (system
level). To make the interface command available to the level 1 users, execute the following commands:
command-privilege level 1 view shell system-view, command-privilege level 1 view system interface
gigabitethernet1/0/1, and command-privilege level 1 view system quit. Then, the level 1 users can
enter system view, execute the interface gigabitethernet command, and return to user view.
Examples
# Set the command level of the interface command to 0 in system view.
<Sysname> system-view
[Sysname] command-privilege level 0 view system interface

display clipboard

Syntax
display clipboard [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display clipboard to display data in the clipboard.
To copy some content to the clipboard:
Move the cursor to the starting position of the content, and then press the Esc+Shift+, combination.
1.
Move the cursor to the ending position of the content, and then press the Esc+Shift+. combination.
2.
3