[Sysname] ip https enable
ip https port
Syntax
ip https port port-number
undo ip https port
View
System view
Default level
3: Manage level
Parameters
port-number: Port number of the HTTPS service, in the range of 1 to 65535.
Description
Use ip https port to configure the port number of the HTTPS service.
Use undo ip https port to restore the default.
By default, the port number of the HTTPS service is 443.
Verify that the port number is not used by another service, because this command does not check for
conflicts with configured port numbers.
Related commands: display ip https.
Examples
# Configure the port number of the HTTPS service as 6000.
<Sysname> system-view
[Sysname] ip https port 6000
ip https ssl-server-policy
Syntax
ip https ssl-server-policy policy-name
undo ip https ssl-server-policy
View
System view
Default level
3: Manage level
Parameters
policy-name: Name of an SSL server policy, a string of 1 to 16 characters.
Description
Use ip https ssl-server-policy to associate the HTTPS service with an SSL server-end policy.
Use undo ip https ssl-server-policy to remove the association.
35