Bootrom - HP 6125G Command Reference Manual

Examples
# Specify test.bin as the main startup system software image file for the master (member ID 1). This
example assumes that this file has been saved in the root directory of the storage medium on the master.
<Sysname> boot-loader file test.bin slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
# Specify test.bin as the main startup system software image file for IRF member device 2. This example
assumes that the device is a subordinate device and the file has been saved in the root directory of the
storage medium on the device.
<Sysname> boot-loader file slot2#flash:/test.bin slot 2 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 2!
# Specify test.bin as the main startup system software image file for all member devices. This example
assumes that the file has been saved in the root directory of the storage medium on each member device.
<Sysname> boot-loader file test.bin slot all main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
The specified file will be used as the main boot file at the next reboot on slot 2!

bootrom

Syntax
bootrom update file file-url slot slot-number-list
View
User view
Default level
3: Manage level
Parameters
update file file-url: Loads a BootWare image in a storage medium to the Normal area of BootWare. The
file-url argument specifies the image file path, a string of 1 to 63 characters. For more information about
file path naming, see "boot-loader."
slot slot-number-list: Specifies a space-separated list of up to seven IRF member ID items. Each item
specifies an IRF member device by its member ID or a range of IRF member devices in the form of
start-member-id to end-member-id. For example, slot 0 to 1 2.
Description
Use bootrom to upgrade the BootWare image of a member device.
Make sure the upgrade file has been saved in the root directory of the storage medium on the device you
are upgrading.
Examples
# Use the a.btm file to upgrade BootWare on the master (member ID 1).
<Sysname> bootrom update file a.btm slot 1
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Bootrom update succeeded in slot 1.
122