Reset Saved-Configuration - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
network-operator
Usage guidelines
Use this command to verify the configuration you have made in a certain view.
This command does not display parameters that are set to their default settings.
For some parameters that can be successfully configured even if their dependent features are not enabled,
this command displays their settings after the dependent features are enabled.
This command can be executed in any user line view to display the running configuration of all user lines.
Examples
# Display the running configuration on interface Ten-GigabitEthernet 1/1/5.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] display this
#
interface Ten-GigabitEthernet1/1/5
port link-mode route
#
return
# Display the running configuration on user lines.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] display this
#
line aux 0
user-role network-operator
#
line con 0
user-role network-admin
#
line vty 0 63
authentication-mode none
user-role network-admin
#
return

reset saved-configuration

Use reset saved-configuration to delete next-startup configuration files.
Syntax
reset saved-configuration [ backup | main ]
Views
User view
153