Reset Saved-Configuration - HP FlexFabric 7900 Series Command Reference Manual

[Sysname] interface fortygige 1/0/1
[Sysname-FortyGigE1/0/1] display this
#
interface FortyGigE1/0/1
port link-mode route
#
return
# Display the running configuration on user lines.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] display this
#
line aux 0
user-role network-admin
#
line vty 0 63
authentication-mode none
user-role network-admin
user-role network-operator
#
return

reset saved-configuration

Use reset saved-configuration to delete next-startup configuration files.
Syntax
reset saved-configuration [ backup | main ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
backup: Deletes the backup next-startup configuration file.
main: Deletes the main next-startup configuration file.
Usage guidelines
CAUTION:
Use this command with caution. This command deletes the next-startup configuration files from
each MPU.
You can delete the main, the backup, or both.
To delete a file that is set as both main and backup next-startup configuration files, you must execute
both the reset saved-configuration backup command and the reset saved-configuration main
command. Using only one of the commands removes the specified file attribute instead of deleting
the file.
151