Reset Arp - HP 6125G Command Reference Manual

reset arp

Syntax
reset arp { all | dynamic | static | slot slot-number | interface interface-type interface-number }
View
User view
Default level
2: System level
Parameters
all: Clears all ARP entries.
dynamic: Clears all dynamic ARP entries.
static: Clears all static ARP entries.
slot slot-number: Clears the ARP entries on a specified IRF member switch. The slot-number argument
specifies the ID of an IRF member switch. The value range for the argument depends on the number of
member switches and their member IDs in the IRF fabric, which you can display with the display irf
command. On a standalone device, the slot-number argument specifies the ID of the device.
interface interface-type interface-number: Clears the ARP entries for the interface specified by the
argument interface-type interface-number.
Description
Use reset arp to clear ARP entries from the ARP mapping table.
With interface interface-type interface-number specified, the command clears only dynamic ARP entries
of the interface.
Related commands: arp static and display arp.
Examples
# Clear all static ARP entries.
<Sysname> reset arp static
8