Dhcp-Snooping Information Remote-Id Format-Type; Dhcp-Snooping Information Remote-Id String - HP 6125G Command Reference Manual

dhcp-snooping information remote-id format-type

Syntax
dhcp-snooping information remote-id format-type { ascii | hex }
undo dhcp-snooping information remote-id format-type
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
ascii: Specifies the code type for the remote ID sub-option as ascii.
hex: Specifies the code type for the remote ID sub-option as hex.
Description
Use dhcp-snooping information remote-id format-type to configure the code type for the
non-user-defined remote ID sub-option.
Use undo dhcp-snooping information remote-id format-type to restore the default.
By default, the code type for the remote ID sub-option is HEX.
This command applies to configuring a non-user-defined remote ID sub-option only. After you configure
the padding content for the remote ID sub-option using the dhcp-snooping information remote-id string
command, ASCII is adopted as the code type. The private padding format only supports the hex code
type.
Related commands: display dhcp-snooping information and dhcp-snooping information format.
Examples
# Configure the code type for the non-user-defined remote ID sub-option as ascii.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dhcp-snooping information remote-id format-type ascii

dhcp-snooping information remote-id string

Syntax
dhcp-snooping information [ vlan vlan-id ] remote-id string { remote-id | sysname }
undo dhcp-snooping information [ vlan vlan-id ] remote-id string
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
vlan vlan-id: Specifies a VLAN ID, in the range of 1 to 4094.
56