Dns Source-Interface - HP 6125G Command Reference Manual

Layer 3 - ip services command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

In interface view:
dns server ip-address
undo dns server ip-address
View
System view, interface view
Default level
2: System level
Parameters
ip-address: Specifies the IPv4 address of the DNS server.
Description
Use dns server to specify a DNS server.
Use undo dns server to remove DNS servers.
No DNS server is specified by default.
You can configure up to six DNS servers, in system view, and up to six DNS servers on all interfaces
of a device.
A DNS server configured in system view has a higher priority than one configured in interface view.
A DNS server configured earlier has a higher priority than one configured later in the same view.
A DNS server manually configured has a higher priority than one dynamically obtained through
DHCP.
Running the undo dns server command in system view will delete all DNS servers configured in
system view and interface view. Running the undo dns server ip-address command in system view
or interface view will delete the specific DNS server in system view or interface view.
Related commands: display dns server.
Examples
# Specify the DNS server 172.16.1.1 in system view.
<Sysname> system-view
[Sysname] dns server 172.16.1.1

dns source-interface

Syntax
dns source-interface interface-type interface-number
undo dns source-interface
View
System view
Default level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
74

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents