Display Ipv6 Neighbors Count - HP 6125G Command Reference Manual

Table 27 Command output
Field
IPv6 Address
Link-layer
VID
Interface
State
Type
Age

display ipv6 neighbors count

Syntax
display ipv6 neighbors { { all | dynamic | static } [ slot slot-number ] | interface interface-type
interface-number | vlan vlan-id } count [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays the total number of all neighbor entries, including neighbor entries acquired dynamically
and configured statically.
dynamic: Displays the total number of all neighbor entries acquired dynamically.
static: Displays the total number of neighbor entries configured statically.
slot slot-number: Displays the total number of neighbor entries on a specified IRF member switch. The
slot-number argument specifies the ID of an IRF member switch. The value range for the argument
depends on the number of member switches and their member IDs in the IRF fabric, which you can
display with the display irf command. On a standalone device, the slot-number argument specifies the ID
of the device.
Description
IPv6 address of a neighbor.
Link layer address (MAC address) of a neighbor.
VLAN to which the interface connected with a neighbor belongs.
Interface connected with a neighbor.
State of a neighbor:
•
INCMP—The address is being resolved. The link layer address of the neighbor is
unknown.
•
REACH—The neighbor is reachable.
•
STALE—The reachability of the neighbor is unknown. The device will not verify the
reachability any longer unless data is sent to the neighbor.
•
DELAY—The reachability of the neighbor is unknown. The device sends an NS
message after a delay.
•
PROBE—The reachability of the neighbor is unknown. The device sends an NS
message to verify the reachability of the neighbor.
Type of neighbor information, including static configuration (represented by S) and
dynamic acquisition (represented by D).
For a static entry, a hyphen (-) is displayed. For a dynamic entry, the reachable time
(in seconds) elapsed is displayed, and if it is never reachable, a pound sign (#) is
displayed (for a neighbor acquired dynamically).
109