Dhcp-Snooping Check Request-Message; Dhcp-Snooping Information Circuit-Id Format-Type - HP 6125G Command Reference Manual

With this function enabled, the DHCP snooping device compares the chaddr field of a received DHCP
request with the source MAC address field in the frame. If they are the same, the DHCP snooping device
decides this request valid and forwards it to the DHCP server. If not, the DHCP request is discarded.
Examples
# Enable MAC address check of DHCP snooping.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dhcp-snooping check mac-address

dhcp-snooping check request-message

Syntax
dhcp-snooping check request-message
undo dhcp-snooping check request-message
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
None
Description
Use dhcp-snooping check request-message to enable DHCP-REQUEST message check of DHCP
snooping.
Use undo dhcp-snooping check request-message to disable DHCP-REQUEST message check of the
DHCP snooping.
By default, this function is disabled.
With this function enabled, upon receiving a DHCP-REQUEST message, a DHCP snooping device
searches local DHCP snooping entries for the corresponding entry of the message. If an entry is found,
the DHCP snooping device compares the entry with the message information. If they are consistent, the
DHCP-REQUEST message is considered as valid lease renewal request and forwarded to the DHCP
server. If they are not consistent, the messages is considered as forged lease renewal request and
discarded. If no corresponding entry is found locally, the message is considered valid and forwarded to
the DHCP server.
Examples
# Enable DHCP-REQUEST message check of DHCP snooping.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dhcp-snooping check request-message

dhcp-snooping information circuit-id format-type

Syntax
dhcp-snooping information circuit-id format-type { ascii | hex }
52