Dhcp Relay Security Refresh Enable - HP 6125G Command Reference Manual

Layer 3 - ip services command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

all: Specifies that all client entries are to be removed.
dynamic: Specifies that dynamic client entries are to be removed.
static: Specifies that manual client entries are to be removed.
Description
Use dhcp relay security static to configure a static client entry, which is the binding between IP address,
MAC address, and Layer 3 interface on the relay agent.
Use undo dhcp relay security to remove specified client entries from the relay agent.
No manual client entry is configured on the DHCP relay agent by default.
When using the dhcp relay security static command to bind an interface to a static client entry,
make sure that the interface is configured as a DHCP relay agent. Otherwise, entry conflicts may
occur.
The undo dhcp relay security interface command is used to remove all the dynamic client entries
from the interface.
Related commands: display dhcp relay security.
Examples
# Bind DHCP relay interface VLAN-interface 2 to IP address 10.10.1.1 and MAC address
0005-5d02-f2b3 of the client.
<Sysname> system-view
[Sysname] dhcp relay security static 10.10.1.1 0005-5d02-f2b3 interface vlan-interface
2

dhcp relay security refresh enable

Syntax
dhcp relay security refresh enable
undo dhcp relay security refresh enable
View
System view
Default level
2: System level
Parameters
None
Description
Use dhcp relay security refresh enable to enable the DHCP relay agent to periodically refresh dynamic
client entries.
Use undo dhcp relay security refresh enable to disable periodic refresh of dynamic client entries.
By default, the DHCP relay agent is enabled to periodically refresh dynamic client entries.
If you disable the DHCP relay agent from periodically refreshing dynamic client entries, such entries do
not age automatically. Therefore, if a client relinquishes its IP address, you need to manually remove the
corresponding dynamic client entry on the DHCP relay agent.
Related commands: dhcp relay security tracker and dhcp relay security static.
32

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents