Dhcp Relay Information Enable - HP 6125G Command Reference Manual

View
Interface view
Default level
2: System level
Parameters
circuit-id: Padding content for the user-defined circuit ID sub-option, a case-sensitive string of 3 to 63
characters.
Description
Use dhcp relay information circuit-id string to configure the padding content for the user-defined circuit
ID sub-option.
Use undo dhcp relay information circuit-id string to restore the default.
By default, the padding content for the circuit ID sub-option depends on the padding format of Option
82.
After you configure the padding content for the circuit ID sub-option using this command, ASCII is
adopted as the code type.
Related commands: dhcp relay information format and display dhcp relay information.
Examples
# Configure the padding content for the circuit ID sub-option as company001.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] dhcp relay information circuit-id string company001

dhcp relay information enable

Syntax
dhcp relay information enable
undo dhcp relay information enable
View
Interface view
Default level
2: System level
Parameters
None
Description
Use dhcp relay information enable to enable the relay agent to support Option 82.
Use undo dhcp relay information enable to disable Option 82 support.
By default, Option 82 support is disabled on the DHCP relay agent.
Related commands: display dhcp relay information.
27