Display Dhcp Relay Security Tracker - HP 6125G Command Reference Manual

You must enable address check, or IP source guard on the DHCP relay agent before it can generate
dynamic client entries. For more information about IP source guard, see Security Configuration Guide.
Examples
# Display statistics about bindings of DHCP relay agents.
<Sysname> display dhcp relay security statistics
Static Items
Dynamic Items
Temporary Items
All Items
Table 7 Command output
Field
Static Items
Dynamic Items
Temporary Items
All Items

display dhcp relay security tracker

Syntax
display dhcp relay security tracker [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display dhcp relay security tracker to display the interval for refreshing dynamic bindings on the
relay agent.
Examples
# Display the interval for refreshing dynamic bindings on the relay agent.
<Sysname> display dhcp relay security tracker
Current tracker interval : 10s
The interval is 10 seconds.
:1
:0
:0
:1
Description
Static binding items
Dynamic binding items
Temporary binding items
All binding items
40